Ultrasonic Flaw Detector TUD201
Description:
The digital ultrasonic flaw detector is an easy to use, tough and affordable. It can fast and accurately detect various defects (cracks, impurity, air holes, discontinuity) in the work piece with nondestructive method. It is widely used in laboratories and production field. TUD201 satisfies wide range of application such as inspection and quality control of manufacturing, welding, material processing and petrochemical industry. It is also used in safety check and life evaluation of aerospace industry, railway system and pressure vessels.Special Feature:
- Easy to update and convenient to maintain
- Large & bright EL display screen, brightness and adjustable
- Manual or automatic creation of DAC curve with standard test block
- Gate setting and alarm indication
- Storage up to 100 A scan waveforms and 10000 thickness readings
- RS232 interface
- Waveform freezing and peak hold
- Low battery warning on screen
| Test Modes | Pulse-echo and dual |
| Pulser | Spike pulse transmitter |
| Min. Range | 2.5mm (C=5920 m/s, steel) 0.1 inch (C=233 inch/ms) |
| Max. Range | 9999mm (C=5920 m/s, steel) 390 inch (C=233 inch/ms) |
| Material Velocity |
1000 to 9999 m/s
variable in steps of 1 m/s 40 to 390 inch/ms in steps of 0.1 inch/ms |
| Display Delay | -20µs to +3400µs |
| Probe Delay | 0-99.99µs, steps of 0.01µs |
| Gain | 0-110 dB variable in selectable steps of 0.2, 0.5, 1, 2, 6, 12 step 0.0 locked |
| Damping | 50 ohms, 150 ohms and 400 ohms |
| Rectification | Full wave, positive half wave, negative half wave and RF |
| Bandwidth | Three selectable broadband (-3dB): low 0.2-1MHz, Middle 0.5-4 MHz, High 1-10MHz |
| Reject | Linear, 0-80% of full screen, variable in steps of 1% |
| Measurement Resolution |
Sound path: 0.1mm
(display range<99.9mm) 1mm (display range ≥100mm) 0.01 inch (display range <3.90 inch) 0.1 inch (display range ≥3.9 inch)Amplitude: 1% SH, highest echo in the Gate |
| Display Screen and A-Scan | Thin film electroluminescent display: 115mmX86mm (4.5 inchX34inch) 320X240 pixels, Zoom display, filled or outlined display and A-scan freeze (gate movement in the frozen A-scan impossible) |
| Distance Readout | Provide single echo or echo to echo thickness reading or sound path, surface, and depth reading for angle beam testing with either peak or flank detection |
| Unit | Inch or mm |
| Refracted angle | Fixed setting of 0o, 30o, 45o, 60o, 70o, 90o or variable from 0o to 90o refracted angle in 1o resolution |
| Interface | RS232 bi-directional 9600 baud, 8 bits word length, no parity, 1 stop bit |
| Printer Driver | TP UP-NH-S line thermal printer |
| Power Supply | Mains and/or battery operation with 4 Li batteries, operating time approx. 6 Hrs or Charger/Adapter DC output 9V/3A |
| Low Battery Alarm | On-screen warning of low battery |
| AC Mains requirements | 85 to 264VAC/1.0A, 47 to 63Hz |
| Charging Time | 4-5 Hrs Max. |
| Operating Temperature | 0oC-40oC (32F-104F) |
| Storage Temperature | -20oC-+60oC (-4F-140F) |
| Dimension (D X W X H) | 53*184*230mm |
| Weight | 1.4kg (3.1 lbs) with batteries |
| Probe Connector | LEMO |
| Standard Delivery | Optional Accessories | |
| Main Unit | 1 | Ÿ Standard Echo Probe BH-50 |
| Li Battery | 1 | Ÿ Angle-beam Probe (5MHz-6x6K2) |
| Neck strap | 1 | Ÿ Angle-beam Probe (2.5MHz-13x13K2.5) |
| Power supply adapter | 1 | Ÿ Straight-beam Probe (2.5MHz-Ø14) |
| Couplant | 1 | Ÿ Data View for TUD201 (Software with PC cable |
| Straight-beam probe (2.5MHz-Ø20) | 1 | Ÿ TP UP-NH Thermal line Printer (with power supply unit and 9 pin plug cable) |
| Angle-beam Probe (5MHz-8x9K2) | 1 | |
| Cable with LEMO connector | 2 | |
| Hard shell case | 1 | |
| Ø3.2 Cross screwdriver | 1 | |
| Time Certificate | 1 | |
| Warranty Card | 1 | |
| Instruction Manual | 1 | |
| Carrying Case | 1 |