Ultrasonic Flaw Detector TUD210
Ultrasonic Flaw Detector TUD210 Special Feature:
- Real-time multi-function system, stable, reliable and efficient operation
- The embedded software can be online updated
- Big memory of 400 A graph and 40000 thickness value
- Super Fast sampling capability, RF wave full display, minimum display range 2.5mm
- Wide & high bright EL display screen
- Alternative switch between single probe and double probe
- DAC automatically creation with standard test block
- Li battery, continue working time up to 6 Hrs
- USB and RS232 interface
- 3 offset adjustable DAC curve cater to various requirements of DAC in all walks of life
- 400 independent flaw detection channel
- High speed sampling, radio frequency display with 80 MHz for sampling Min. display range 2.5mm
| Test Modes | Pulse-echo and dual |
| Pulser | Spike excitation pulser |
| Min. Range | 2.5mm (C=5920 m/s, steel) 0.1 inch (C=233 inch/ms) |
| Max. Range | 5,000mm (C=5920 m/s, steel) 200 inch (C=233 inch/ms) |
| Material Velocity | 1,000 to 9,999 m/s variable in steps of 1 m/s 40 to 390 inch/ms in steps of 0.1 inch/ms |
| Vertical Linearity Error | ≤3% |
| Dynamic Range | ≥32dB |
| Horizontal Linearity Error | ≤0.2% |
| Sensitivity Leavings | ≥50dB |
| Pulse Displacement | -20µs to +3400µs |
| Probe Delay | 0-99.99µs, resolution 0.01 |
| Gain | 0-110 dB variable in selectable steps of 0.2, 0.5, 1, 2, 6, 12 and 0.0 locked |
| Damping | 50 ohms, 150 ohms and 400 ohms |
| Rectification | Full wave, positive half wave, negative half wave and RF |
| Bandwidth | Three selectable broadband (-3dB): low 0.2-1MHz, Middle 0.5-4 MHz, High 1-10MHz |
| Reject | Linear, 0-80% of full screen, variable in steps of 1% |
| Measurement Resolution |
Sound path: 0.1mm (display range<99.9mm) 1mm (display range
≥100mm) 0.01 inch (display range <3.90 inch) 0.1 inch (display range ≥3.9 inch)Amplitude: 1% SH, highest echo in the Gate |
| Display Screen and A-Scan | Thin film electroluminescent display: 115mmX86mm (4.5 inchX34inch) 320X240 pixels, Zoom display, filled or outlined display and A-scan freeze (gate movement in the frozen A-scan impossible) |
| Distance Readout | Provide single echo or echo to echo thickness reading or sound path, surface, and depth reading for angle beam testing with either peak or flank detection |
| Unit | Metric/imperial |
| Refracted angle | Fixed setting of 0o, 30o, 45o, 60o, 70o, 90o or variable from 0o to 90o refracted angle in 1o resolution |
| Interface | USB and RS232 bi-directional 9600 baud, 8 bits word length, no parity, 1 stop bit |
| Printer Driver | TP UP-NH-S line thermal printer |
| Power Supply | Li batteries, continues working time approx. 6 Hrs or Charger/Adapter DC output 9V/3A |
| Low Battery Alarm | On-screen warning of low battery |
| AC Mains requirements | 85 to 264VAC/1.0A, 47 to 63Hz |
| Charging Time | 5 Hrs Max. |
| Operating Temperature | 0oC-40oC (32F-104F) |
| Storage Temperature | -20oC-+60oC (-4F-140F) |
| Dimension (D X W X H) | 53*184*230mm |
| Weight | 1.4kg (3.1 lbs) with batteries |
| Probe Connector | LEMO |
| Standard Delivery | Optional Accessories | |
| Main Unit | 1 | Ÿ Standard Echo Probe BH-50 |
| Li Battery | 1 | Ÿ Angle-beam Probe (5MHz-6x6K2) |
| Neck strap | 1 | Ÿ Angle-beam Probe (2.5MHz-13x13K2.5) |
| Power supply adapter | 1 | Ÿ Straight-beam Probe (2.5MHz-Ø14) |
| Couplant | 1 | Ÿ Data View for TUD201 (Software with PC cable |
| Straight-beam probe (2.5MHz-Ø20) | 1 | Ÿ TP UP-NH Thermal line Printer (with power supply unit and 9 pin plug cable) |
| Angle-beam Probe (5MHz-8x9K2) | 1 | Ÿ USB communication cable |
| Cable with LEMO connector | 2 | |
| Hard shell case | 1 | |
| Ø3.2 Cross screwdriver | 1 | |
| Time Certificate | 1 | |
| Warranty Card | 1 | |
| Instruction Manual | 1 | |
| Carrying Case | 1 |